Rear Seat BeltRear Seat Belt Retractor Components and Components Location Component Location 1. Rear seat belt retractor [LH]2. Rear seat belt retractor [RH] Rear Seat Belt Retractor Repair procedures Replacement • When installing the belt, make sure not to damage the retractor...
Waveform This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals. Generally CkPS signal is used to detect the piston's position and CMPS signal is used to detect the Top Dead Center of each cylinder...
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door lock (A). Tightening torque : 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 3. Remove the front door outside handle (A) by sliding it rearward...