Hyundai Sonata LF: Blind Spot Detection system / Components and Components Location

Hyundai Sonata LF 2014-2019 Service Manual / Body Electrical System / Blind Spot Detection system / Components and Components Location

Components

1. Blind Spot Detection (BSD) Unit
2. BSD switch
3. Speaker
4. BSD warning lamp
5. Cluster

    Specifications

    S..

    Description and Operation

    Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: ETC (Electronic Throttle Control) System Description and Operation


    Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input...

    Hyundai Sonata LF 2014-2019 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures


    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org