| Specifications |
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | 9V ~ 16V |
| Operating speed | 30?/h ~ 250?/h |
| Sensible distance | 70m (Sedan) |
| Curvature radius | Start : More than 125m/30km/h Stop : Less than 125m |
| Frequency | 24 GHz |
| Numbers | 2EA (Master 1EA, Slave 1EA) |
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector...
Removal 1. Disconnect the battery negative terminal. 2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension. 3. Remove the drive belt (A). 4. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C)...