| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the driver seat assembly.
(Refer to Body - "Front Seat Assembly") |
| 3. |
Loosening the IMS unit mounting screws.
|
| 4. |
Disconnect the IMS module connectors (B) and then remove the IMS unit (A).
|
| Installation |
| 1. |
Install the memory power seat unit. |
| 2. |
Install the driver seat assembly. |
| 3. |
Connect the negative (-) battery terminal. |
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the door mood lamp connector. 4. Remove the door mood lamp (A). Installation 1. Install the door mood lamp and connector...
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance with the air/fuel ratio. The sensor must be hot in order to operate normally...