| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the LDWS unit cover (A).
|
| 3. |
Disconnect the LDWS unit connector (A).
|
| 4. |
Remove the LDWS unit after disengaging the mounting bracket (A).
|
| Installation |
| 1. |
Align LDWS unit with windshield bracket using forward edge point (A).
|
| 2. |
Engage snaps and pivot upward to lock point (B).
|
| 3. |
Connect the LDWS unit connector. |
| 4. |
Connect the negative (-) battery terminal. |
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove the front fog lamp assembly (A) after loosening the mounting nut...