| Component |

Description and OperationDescription System Overview The System offers the following features: - Human / machine interface through a 1-stage button, for terminal switching and engine start...
Start/Stop Button Repair proceduresRemoval 1. Disconnect the negative(-) battery terminal. 2. Remove the center facia panel. (Refer to Heating, Ventilation and Air Conditioning - "Controller") 3...
C..
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...