| Circuit Diagram |






Seat Heater Switch Repair proceduresRemoval [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and A/C control unit. (Refer to Heating, Ventilation and Air Conditioning - "Controller") [Rear Seat] 1...
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and reduce with lower intensive light...
Removal and Installation 1. Remove the water temperature control assembly. (Refer to Colling System - "Water Temperature Control Assembly") 2. Remove the water pipe (A). Tightening torque M6 bolt and nuts : 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf...