| Specifications |
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F ~ 176°F (-30°C ~ 80°C) |
| Load | Max. 4mA (When welcome light function off) |
| Items | Specification |
| Frequency | 433.92 Mhz |
| Antenna type | FSK (Frequency Shift Keying) |
| Items | Specification | ||
| Battery | Lithium battery 3V 1EA | ||
| Distance | 30m from vehicle, RF : 30m, Passive(LF) : 0.7m | ||
| Battery life | More than 2 years (10 times / a day)
| ||
| Push buttons | 4 (Door lock / unlock, Tailgate, Panic) | ||
| Frequency(Rx) | 125 kHz | ||
| Frequency(Tx) | 433.92 MHz | ||
| Numbers | 2EA | ||
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
| Frequency | 125kHz |
| Numbers | Interior(3EA), Door(2EA), Bumper(1EA) |
Components and Components LocationComponent Location (1) 1. Smart key unit (SMK)2. Interior antenna 23. Door outside handle4. Interior antenna 15. Buzzer Component Location (2) 1...
Removal When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. [In the case of installing used ECM] 1. Perform "Neutral mode" procedure with GDS. (Refer to "Immobilizer" in BE group) 2...
Replacement 1. Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow. 2. After loosening the mounting bolts, then remove the rear seat folding lever (A). 3. Install in the reverse order of removal...