Hyundai Sonata LF: Engine Control System / Ambient Temperature Sensor (ATS) Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Engine Control / Fuel System / Engine Control System / Ambient Temperature Sensor (ATS) Description and Operation

Description

Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger. The electrical resistance of the thermistor decreases as the temperature increases, and increases as the temperature decreases This sensor has a Negative Temperature Coefficient (NTC) and its resistance is in inverse proportion to the temperature.

Intake Air Temperature Sensor (IATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4...

Ambient Temperature Sensor (ATS) Specifications

Specification Temperature[°C(°F)]Resistance(k?) -40(-40)841.2~1019.3 -20(-4)263.8~306.50(32)92.4~102.810(50)57.0~62.220(68)36.2~38.840(104)15...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center facia panel. (Refer to Heating, Ventilation and Air Conditioning - "Controller") 3. Disconnect the body control module connectors (A). 4. Remove the body control module (A) after loosening the mounting nuts...

Hyundai Sonata LF 2014-2019 Service Manual: Fuel Filler Cap Description and Operation