| Specification |
| Temperature[°C(°F)] | Resistance(k?) | ||
| -40(-40) | 841.2~1019.3 | ||
| -20(-4) | 263.8~306.5 | ||
| 0(32) | 92.4~102.8 | ||
| 10(50) | 57.0~62.2 | ||
| 20(68) | 36.2~38.8 | ||
| 40(104) | 15.3~16.7 | ||
| 50(122) | 10.3~11.4 | ||
| 60(140) | 7.1~8.0 | ||
| 80(176) | 3.5~4.0 |
Ambient Temperature Sensor (ATS) Description and OperationDescription Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger...
Removal and Installation 1. Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover") 2. Remove the pump cover (A). Tightening torque : 8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1 lb-ft) 3. Remove the inner rotor (B) and outer rotor (C)...
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...