Hyundai Sonata LF: Fuses And Relays / Relay Box (Passenger Compartment) Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment) Repair procedures

Fuse Inspection

1.	Be sure there is no play in the fuse holders, and that the fuses are held securely.

2.	Are the fuse capacities for each circuit correct?

Are there any blown fuses?

If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Diagnosis with GDS

The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).

The diagnostic system (GDS) provides the following information.

(1)	1) Self diagnosis : Checking the failure code (DTC) and display

(2)	2) Current data : Checking the system input/output data state

(3)	3) Actuator test : Checking the system operation condition

(4)	4) Additional function : Other controlling such as he system option and zero point adjustment

2.	Select the "Car Model" and the system to be checked in order to check the vehicle with the tester.

3.	Select the "Smart Junction Block (SJB)".

4.	Select the "Current Data" menu to search the current state of the input/output data. The input/output data for the sensors corresponding to the Smart Junction Block (SJB) can be checked.

5.	If you will check the power door lock operation forcefully, select "Actuation Test".

6.	If you want to change user option, select "User Option".

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")

3.	Disconnect the connectors from the fuse side of the smart junction block.

4.	Remove the smart junction block (A) after loosening the mounting nuts.

5.	Disconnect the connectors from the back side of the smart junction box.

Installation

1.	Install the smart junction box.

2.	Install the crash pad lower panel.

3.	Connect the negative (-) battery terminal.

4.	Check that all system operates normally.

Relay Box (Passenger Compartment) Description and Operation

Description Auto Cut System Of Dark Current AbbreviationExpalnationACUAirbag Control UnitADMAssist Door ModuleB_CANBody Controller Area NetworkBCMBody Control ModuleBSDBlind Spot DetectionC_CANChassis Controller Area NetworkCLUCluster ModuleDATCDual Automatic Temp ControlDDMDriver Door ModuleESCElectronic Stability ProgramEMSEngine Management SystemLDWSLane Departure Warning SystemM_CANMulti media Controller Area NetworkMDPSMotor Driven Power SteeringP_CANPowertrain Controller Area NetworkPSMPower Seat ModuleSASSteering Angle SensorSJBSmart Junction BlockSMKSmart Key UnitSPASSmart Parking Assist SystemTCUTransmission Control UnitTPMSTire Pressure Monitoring SystemVDCVehicle Dynamic ControlTMUTelematics SystemABSAnti-lock Brake SystemSCCSmart Cruise Control Smart Junction Block (SJB) General function : Interior Junction Block + some functions of BCM It controls loads with CAN communication and IPS...

Indicators And Gauges

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures

Refrigerant System Service Basics Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system. • Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose, or throat...

Hyundai Sonata LF 2014-2019 Service Manual: Cylinder Head Components and Components Location