Hyundai Sonata LF: DCT (Dual Clutch Transmission) System / Dual Clutch Transmission Control System
- Description and Operation
- Components and Components Location
- DCT Control Module (TCM) Description and Operation
- DCT Control Module (TCM) Schematic Diagrams
- DCT Control Module (TCM) Repair procedures
- Clutch Actuator Assembly Components and Components Location
- Clutch Actuator Assembly Specifications
- Clutch Actuator Assembly Description and Operation
- Clutch Actuator Assembly Schematic Diagrams
- Clutch Actuator Assembly Repair procedures
- Gear Actuator Assembly Components and Components Location
- Gear Actuator Assembly Specifications
- Gear Actuator Assembly Description and Operation
- Gear Actuator Assembly Schematic Diagrams
- Gear Actuator Assembly Repair procedures
- Input shaft speed sensor 1 Components and Components Location
- Input shaft speed sensor 1 Specifications
- Input shaft speed sensor 1 Description and Operation
- Input shaft speed sensor 1 Schematic Diagrams
- Input shaft speed sensor 1 Repair procedures
- Input shaft speed sensor 2 Components and Components Location
- Input shaft speed sensor 2 Specifications
- Input shaft speed sensor 2 Description and Operation
- Input shaft speed sensor 2 Schematic Diagrams
- Input shaft speed sensor 2 Repair procedures
- Inhibitor Switch Components and Components Location
- Inhibitor Switch Description and Operation
- Inhibitor Switch Specifications
- Inhibitor Switch Schematic Diagrams
- Inhibitor Switch Troubleshooting
- Inhibitor Switch Repair procedures
- Shift Lever Components and Components Location
- Shift Lever Schematic Diagrams
- Shift Lever Repair procedures
- Shift Cable Components and Components Location
- Shift Cable Repair procedures
Transmission Gear Oil Repair procedures
Inspection • In principle, the transmission oil is maintenance-free, and no exchange is required. But it must be inspected and replenished every 4 years or 40,000 miles...
Description and Operation
Description The Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Alternator Schematic Diagrams
Circuit Diagram • COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal.(High voltage: 4V or higher, low voltage: 2V or lower) • FR signal - The transistor activation signal inside the alternator monitors the voltage generated by the alternator to control the excitation current before it sends the FR signal to the ECM...
Hyundai Sonata LF 2014-2019 Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refer to “Specification” ETC Motor 1...
Categories
- Manuals Home
- Hyundai Sonata Owners Manual
- Hyundai Sonata Service Manual
- Lubrication System
- Engine Mechanical System
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
