Hyundai Sonata LF: Dual Clutch Transmission Control System / Input shaft speed sensor 2 Components and Components Location

Hyundai Sonata LF 2014-2019 Service Manual / DCT (Dual Clutch Transmission) System / Dual Clutch Transmission Control System / Input shaft speed sensor 2 Components and Components Location

Components

1. Input shaft speed sensor 1 (Odd)
2. Input shaft speed sensor 2 (Even)


    Input shaft speed sensor 1 Repair procedures

    Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refer to Dual Clutch Transmission Control System - "TCM") 3...

    Input shaft speed sensor 2 Specifications

    Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Rail Pressure Sensor (RPS) Repair procedures


    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21,500 rpm2.2 ~ 2.56,300 rpm Approx. 3.0 Removal 1...

    Hyundai Sonata LF 2014-2019 Service Manual: Cowl Cross Bar Assembly Repair procedures


    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org