| Circuit Diagram |


Gear Actuator Assembly Description and OperationDescription • Components location : DCT (Dual Clutch Transmission) • Function The gear actuator comprises the shift motor and select solenoid...
Gear Actuator Assembly Repair proceduresRemoval • When gear actuator removing, set control shaft lever to neutral position. 1. Remove the air cleaner assembly and air duct...
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch...
Removal and Installation 1. Loosen the drain plug, and drain the engine coolant. Remove the radiator cap to drain with speed. 2. Disconnect the battery negative terminal. 3. Remove the air cleaner assembly. (Refer to Intake and exhaust system - "Air Cleaner") 4...