| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The gear actuator comprises the shift motor and select solenoid.
Gear actuator shift motor and select solenoid receive signals from TCM to control the gear. |
Gear Actuator Assembly SpecificationsSpecification ItemConditionSpecificationResistance (line to line)Shift motor 1/2135.4 m? ± 10 %Select solenoid 1/20.7 m? ± 10 %Max. currentShift motor 1/245 ASelect solenoid 1/220 ASelect solenoid sensor outputPush4...
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the engine wiring connector and haness clamp and disconnect the wiring from intake manifold. 4. Disconnect the PCV (Positive crankcase ventilation) hose (A) and the PCSV (Purge control solenoid valve) (B)...
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the idler (A). Tightening torque : 42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft) 3. Install in the reverse order of removal...