| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The input shaft speed sensor is important in that it detects
the input shaft RPM and sends this information to the Transmission
Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, including
feedback control, gear shift control and failure detection of other
sensors. |
Input shaft speed sensor 1 SpecificationsSpecification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8...
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to Body - "Roof Trim Assembly") 3. Disconnect the curtain airbag harness connector. 4. After loosening the mounting bolts and nuts remove the curtain airbag...
S..