| Circuit Diagram |

Shift Lever Components and Components LocationComponents (1) 1. Shift lever knob2. Shift lever assembly3. Shift cable4. Shift cable retainer Components (2) 1. Shift lever assembly2. P position switch3...
Shift Lever Repair proceduresRemoval 1. Disconnect a boots from the console upper cover. 2. Pull the knob (A) in the direction of "F" and remove the knob. 3. Remove the floor console assembly...
Description Burglar Alarm State [B/A State] B/A StateDescriptionDISARM 1. In "DISARM" state, no vehicle start inhibition. So, when door, hood, or Tailgate is opened, there is no alarm sound and flashing. 2. If the battery is disconnected while the state is not "ARM/ARMWAIT/ALARM/REARM", B/A state is set to "DISARM" state...
Inspection Transmission Control Module (TCM) Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM...