| Components |

| 1. Shift lever knob 2. Shift lever assembly | 3. Shift cable 4. Shift cable retainer |
Shift Lever Repair proceduresRemoval 1. Disconnect a boots from the console upper cover. 2. Pull the knob (A) in the direction of "F" and remove the knob. 3. Remove the floor console assembly...
Shift Cable Repair proceduresRemoval 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refer to Dual Clutch Transmission Control System - "TCM") 3...
Components and Components Location Component Location 1. Fender assembly Repair procedures Replacement • Be careful not to damage the fender and body. • When removing the clips, use a clip remover...
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance with the air/fuel ratio. The sensor must be hot in order to operate normally...