Hyundai Sonata LF: Dual Clutch Transmission Control System / Inhibitor Switch Description and Operation
| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
- The inhibitor switch mounted on the upper of transaxle and connected with shifter lever.
- The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4).
- The inhibitor switch signals delivered at the TCM according
to control of the shift lever positions(P, R, N, D) and it is used to
control of the gear setting. |
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Steering Angle Sensor Repair procedures
Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases. - Replacement of the Steering Wheel Angle Speed Sensor - Replacement or repair of the Steering column - Detection of DTC codes (C1260, C1261) - Replacement of the sensor cluster - Replacement of HECU Calibration procedure Perform wheel alignment and stand the steering wheel in a line within ±5°error...
Hyundai Sonata LF 2014-2019 Service Manual: Rear Door Latch Repair procedures
Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. Disconnect the rear door latch connector (A). 3. Remove the rear door inside handle cage (A). 4. Remove the rear door inside handle cable (A) by pushing it rearward...
Categories
- Manuals Home
- Hyundai Sonata Owners Manual
- Hyundai Sonata Service Manual
- Front Driveshaft Repair procedures
- Ignition System
- Alternator Repair procedures
- New on site
- Most important about car
