Hyundai Sonata: Brake System / Brake System
- Repair procedures
- Brake Booster Components and Components Location
- Brake Booster Repair procedures
- Master Cylinder Components and Components Location
- Master Cylinder Repair procedures
- Brake Line Components and Components Location
- Brake Line Repair procedures
- Brake Pedal Components and Components Location
- Brake Pedal Repair procedures
- Front Disc Brake Components and Components Location
- Front Disc Brake Repair procedures
- Rear Disc Brake Components and Components Location
- Rear Disc Brake Repair procedures
- Stop Lamp Switch Components and Components Location
- Stop Lamp Switch Description and Operation
- Stop Lamp Switch Schematic Diagrams
- Stop Lamp Switch Troubleshooting
- Stop Lamp Switch Repair procedures
- Stop Signal Electronic Module Components and Components Location
- Stop Signal Electronic Module Specifications
- Stop Signal Electronic Module Schematic Diagrams
- Stop Signal Electronic Module Repair procedures
Troubleshooting
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the
problem. The numbers indicate the priority of the like cause of the
problem. Check each part in o ...
Repair procedures
Operation and Leakage Check
Check all of the following items:
ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test
drive. If the brakes do not work prope ...
Other information:
Hyundai Sonata LF 2014-2019 Owners Manual: Immobilizer Indicator Light (With Smart Key)
This indicator light illuminates for up to 30 seconds:
When the vehicle detects the smart key in the vehicle properly while the ignition
switch or the Engine Start/ Stop button is ACC or ON.
- At this time, you can start the engine.
- The indicator light goes off after starting the engine.
This in ...
Hyundai Sonata LF 2014-2019 Service Manual: Wheel Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
When using an impact gun, final tightening torque should be checked using a torque wrench.
Run out inspection
1.
Jack up the vehicl ...
