Hyundai Sonata: Heating, Ventilation and Air Conditioning / Air Conditioning System
Hyundai Sonata LF 2014-2019 Service Manual / Heating, Ventilation and Air Conditioning / Air Conditioning System
- General Safety Information and Caution
- Description and Operation
- Repair procedures
- Components and Components Location
- Compressor oil Repair procedures
- Refrigerant Line Components and Components Location
- Refrigerant Line Repair procedures
- Compressor Description and Operation
- Compressor Components and Components Location
- Compressor Repair procedures
- Condenser Components and Components Location
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- A/C Pressure Transducer Components and Components Location
- A/C Pressure Transducer Description and Operation
- A/C Pressure Transducer Repair procedures
- Evaporator Temperature Sensor Description and Operation
- Evaporator Temperature Sensor Repair procedures
- In-car Sensor Description and Operation
- In-car Sensor Repair procedures
- Photo Sensor Description and Operation
- Photo Sensor Repair procedures
- Ambient Temperature Sensor Description and Operation
- Ambient Temperature Sensor Repair procedures
Troubleshooting
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components,
first determine if the malfunction is due to the refrigerant charge, air
flow or compressor. ...
General Safety Information and Caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the
skin of your hand could result in localized frostbite. When handling the
refrigerant, be ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: CVVT & Camshaft Repair procedures
Removal
1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Turn the crankshaft damper pulley so that No. 1 piston is at top dead center.
(1)
Turn the crankshaft damper pulley and align its groove with
the timing mark on the timing chain cove ...
Hyundai Sonata LF 2014-2019 Service Manual: Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil lever gauge (A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
2.
Install in the reverse order of removal. ...
© 2018-2024 www.hsonatalf.org
