Front Seat Frame Assembly Repair proceduresReplacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...
Components and Components LocationComponents Rear sear back assembly 1. Rear seat back cover2. Rear seat back pad3. Rear seat headrest guide4. Rear seat headrest5. Rear seat back webbing guide6...
Description The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel pump and measures the pressure in the low pressure fuel line. Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the low pressure fuel pump...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag module. (Refer to Restraint - "Knee Airbag (KAB) Module") 4. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut...