| Replacement |
| 1. |
Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.
|
| 2. |
After loosening the mounting bolts, then remove the rear seat folding lever (A).
|
| 3. |
Install in the reverse order of removal. |
Front Seat BeltComponents and Components Location Components 1. Front seat belt retractor2. Height adjuster3. Rear seat belt buckle [RH]4. Rear seat belt buckle [LH]5...
Inspection Glass Antenna Test 1. Wrap aluminum foil (A) around the tip of the tester probe (B) as shown. 2. Touch one tester probe to the glass antenna terminal (A) and move the other tester probe along the antenna wires to check that continuity exists...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4. Verify that the mode control actuator operates to the vent mode when connected in reverse...