| Replacement |
|
| 1. |
Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.
|
| 2. |
Loosen the mounting nut of the rear back armrest after removing the cover (A) using a screw remover.
|
| 3. |
Remove the rear back armrest (A) in the direction of the arrow.
|
| 4. |
Install in the reverse order of removal. |
Rear Seat Cushion Cover Repair proceduresReplacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...
Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases. - Replacement of the Steering Wheel Angle Speed Sensor - Replacement or repair of the Steering column - Detection of DTC codes (C1260, C1261) - Replacement of the sensor cluster - Replacement of HECU Calibration procedure Perform wheel alignment and stand the steering wheel in a line within ±5°error...
C..