HornComponents and Components Location Component Location 1. Horn switch2. Horn relay (Built - in Metal Core Block PCB)3. Horn (Low pitch)4. Horn (High pitch)5...
SpecificationsSpecifications Audio ItemsAudioModel1) RADIO/CD/MP3 (PA30A, Internal Amplifier)2) RADIO/CD/MP3/SDARS (PA30B+, Internal Amplifier)3) RADIO/CD/MP3/SDARS (PA30B+, External Amplifier)4) RADIO/CD/MP3/SDARS/TMS (PA30B+, Internal Amplifier)5) RADIO/CD/MP3/SDARS/TMS (PA30B+, External Amplifier)Power supplyDC 14...
Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt...
Inspection • Wrap the protective tape on the tool to disassemble with the screwdriver or remover. • Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil...