Floor ConsoleComponents and Components Location Components 1. Knob & boots asssembly2. Upper cover complete 3. Console front complete assembly4. Console rear complete assembly5...
Components and Components LocationComponents (1) 1. Crash pad assembly2. Crash pad side cover [LH]3. Crash pad side cover [RH]4. Crash pad lower panel Components (2) 1. Main crash pad assembly2...
Removal When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. [In the case of installing used ECM] 1. Perform "Neutral mode" procedure with GDS. (Refer to "Immobilizer" in BE group) 2...
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required...