Cylinder Head Repair proceduresRemoval Engine removal is not required for this procedure. • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it...
Components and Components LocationComponents 1. Cylinder block2. Ladder frame3. Crankshaft4. Crankshaft upper bearing5. Crankshaft lower bearing6. Thrust bearing7. Main bearing cap8...
Removal and Installation 1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the oil pressure switch (A). Tightening torque : 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 4...
S..