Hyundai Sonata LF: Cylinder Block / External Damper Flywheel Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Cylinder Block / External Damper Flywheel Repair procedures

Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).

Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.

    External Damper Flywheel Components and Components Location

    C..

    Water Jacket Seperator Components and Components Location

    C..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures


    General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection...

    Hyundai Sonata LF 2014-2019 Service Manual: Description and Operation


    OBD-II review 1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, OBD-I, required monitoring of the fuel metering system, Exhaust Gas Recirculation (EGR) system and additional emission related components...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org