| Components |

| 1. Cylinder block 2. Ladder frame 3. Crank shaft 4. Crank shaft upper bearing 5. Crank shaft lower bearing | 6. Thrust bearing 7. Main bearing cap 8. Crank shaft sproket 9. Crank shaft pulley 10. Piston ring | 11. Piston 12. Connecting rod 13. Connecting rod upper bearing 14. Connecting rod lower bearing 15. Connecting rod bearing cap |
Rear Oil Seal Repair proceduresRemoval 1. Remove the transaxle assembly. (Refer to transaxle - "Manual Transaxle assembly, Auto Transaxle assembly") 2. MT : Remove the flywheel...
Cylinder Block Repair proceduresRemoval Engine removal is required for this procedure. (Refer to Engine and transaxle assembly removal in this group) 1. MT : Remove the flywheel...
Removal 1. Turn the ignition switch OFF. 2. Pull up the lock of the HECU connector , then disconnect the connector. 3. Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner. Tightening torque : ABS : 13...
I..