Hyundai Sonata LF: Brake System / Stop Signal Electronic Module Schematic Diagrams

Stop Signal Electronic Module Specifications

S..

Stop Signal Electronic Module Repair procedures

Inspection 1. Fuse inspection Mount the test fuse to the switch fuse and relay fuse part to confirm a normal joint fit. 2. Inspection of connector by each part Check to see whether or not each connector has been damaged, or terminal surge, or incomplete connection has taken place [Engine room junction box] [Stop signal electronic module] [ABS/VDC control module] 3...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Stop Lamp Switch Repair procedures

Adjustment 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the lower crash pad. (Refer to Body - "Crash Pad") 3. Remove the knee airbag. (Refer to Rstraint - "Air Bag Module") 4. Confirm the gap between stop lamp switch and bracket...

Hyundai Sonata LF 2014-2019 Service Manual: Coolant Repair procedures

Replacement And Air Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator.     When pouring engine coolant, be sure to shut the relay box lid and not to let coolant spill on the electrical parts or the paint...