Hyundai Sonata LF: Brake System / Stop Signal Electronic Module Specifications

Hyundai Sonata LF 2014-2019 Service Manual / Brake System / Brake System / Stop Signal Electronic Module Specifications

Specifications
Category
Data
Operation temperature range (°C)
-40 ~ 85
Preserving temperature range (°C)
-40 ~ 105
Operating voltage (V)
5.8 ~ 16
Rated current (A)
15

    Stop Signal Electronic Module Components and Components Location

    C..

    Stop Signal Electronic Module Schematic Diagrams

    S..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Filler-Neck Assembly Repair procedures


    Removal 1. Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2. Open the fuel filler door and then remove the filler-neck installation screw (A). 3. Lift the vehicle. 4. Remove the rear-LH wheel, tire, and the inner wheel house...

    Hyundai Sonata LF 2014-2019 Service Manual: Accelerator Pedal Repair procedures


    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the mounting cap (A). 4. Remove the installation bolt (A), and then remove the accelerator pedal module...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org