Hyundai Sonata LF: Intake And Exhaust System / Intercooler Components and Components Location

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intercooler Components and Components Location

Components

1. Intercooler air guard
2. Intercooler
3. Intercooler outlet hose
4. Intercooler inlet hose & pipe
5. Intercooler upper mounting bracket
6. Intercooler lower mounting insulator
7. Intercooler upper mounting insulator

    Exhaust Manifold Repair procedures

    Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remove the air cleaner assembly. (Intake And Exhaust System - "Air Cleaner") 4...

    Intercooler Repair procedures

    Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the intercooler inlet hoses & pipe (A). Tightening torque Bolt : 19...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Instrument Cluster Description and Operation


    Description Communication Network Diagram AbbreviationExpalnationACUAirbag Control UnitADMAssist Door ModuleB_CANBody Controller Area NetworkBCMBody Control ModuleBSDBlind Spot DetectionC_CANChassis Controller Area NetworkCLUCluster ModuleDATCDual Automatic Temp ControlDDMDriver Door ModuleESCElectronic Stability ProgramEMSEngine Management SystemLDWSLane Departure Warning SystemM_CANMulti media Controller Area NetworkMDPSMotor Driven Power SteeringP_CANPowertrain Controller Area NetworkPSMPower Seat ModuleSASSteering Angle SensorSJBSmart Junction BlockSMKSmart Key UnitSPASSmart Parking Assist SystemTCUTransmission Control UnitTPMSTire Pressure Monitoring SystemVDCVehicle Dynamic ControlTMUTelematics SystemABSAnti-lock Brake SystemSCCSmart Cruise Control Cluster Variant Coding As we have more options (ESC, MDPS, SCC, etc...

    Hyundai Sonata LF 2014-2019 Service Manual: Receiver-Drier Repair procedures


    Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench [Hex 14] (A). Tightening torque : 4.0 ± 1.0 N.m (0.41 ± 0.1 kgf.m, 2.95 ± 0.72 lbf-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org