Occupant Classification Sensor (OCS) Repair proceduresRemoval OCS ECU 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat assembly...
Driver Airbag (DAB) Module and Clock Spring Description and OperationDescription Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs...
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) When using an impact gun, final tightening torque should be checked using a torque wrench...
Components and Components Location Component Location 1. Fender assembly Repair procedures Replacement • Be careful not to damage the fender and body. • When removing the clips, use a clip remover...