Cruise Control Switch Repair proceduresInspection [Measuring Resistance] 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed)...
General Safety Information and CautionGeneral Safety Information and Caution Be careful when driving the vehicle using the smart cruise control system as follows. • The smart cruise control system may have limits to detect distance to the vehicle ahead due to road and traffic conditions...
Configuration State 1. Driving state Sensor transmissions occur every 1 minutes and pressure is measured every 15 seconds. 2. Stationary state Sensor transmissions does not occur and pressure is measured every 60 seconds. 3. Auto learning status When driving after stopping more than 15 minutes , sensor transmissions occur every 33 seconds and pressure is measured every 10...
Inspection Diagnosis with GDS 1. The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following information. (1) Self diagnosis : Checking the failure code (DTC) and display (2) Current data : Checking the system input/output data state (3) Actuator test : Checking the system operation condition (4) Additional function : Other controlling such as he system option and zero point adjustment 2...