Hyundai Sonata LF: Engine Control System / Fuel Pressure Control Valve Specifications

Hyundai Sonata LF 2014-2019 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve Specifications

Specification
Item
Specification
Coil Resistance (?)
0.5 [20°C(68°F) 

    Fuel Pressure Control Valve Description and Operation

    Description Fuel Pressure Control Valve (FPCV) is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition...

    Fuel Pressure Control Valve Troubleshooting

    S..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Blower Motor Repair procedures


    Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it...

    Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor Description and Operation


    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org