| Specification |
| Item | Specification |
| Power supply(V) | 12 |
| Operation voltage (V) | 9 ~ 16 |
Advanced Smart Cruise Control (ASCC) Unit-Radar Description and OperationDescription The smart cruise control unit is installed on the front right side of the chassis.A radar sensor is embedded in the front section of the unit...
Removal 1. Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2. Open the fuel filler door and then remove the filler-neck installation screw (A). 3. Lift the vehicle. 4. Remove the rear-LH wheel, tire, and the inner wheel house...
Inspection 1. Connect a GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...