Hyundai Sonata: Driving your vehicle / Smart Cruise Control system
.jpg)
➀ Cruise Indicator
➁ Set Speed
➂ Vehicle-to-Vehicle Distance
The Smart Cruise Control System allows you to program the vehicle to maintain constant speed and distance detecting the vehicle ahead without depressing the accelerator/ brake pedal.
WARNING
For your safety, please read the owner's manual before using the Smart Cruise Control system.
WARNING
Do not use smart cruise control when towing a trailer.
WARNING
The Smart Cruise Control System is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead.
WARNING
Take the following precautions:
- If the Smart Cruise Control is left on, (CRUISE indicator light in the instrument cluster is illuminated) the Smart Cruise Control can be activated unintentionally. Keep the Smart Cruise Control System off (CRUISE indicator light OFF) when the Smart Cruise Control is not in use, to avoid inadvertently setting a speed.
- Use the Smart Cruise Control System when traveling on open highways in good weather.
- Do not use the Smart Cruise Control when it may not be safe to keep the
vehicle at a constant speed:
- Driving in heavy or varying speed traffic.
- On slippery (rainy, icy or snow covered) roads.
- Construction areas
- Parking areas
- Hilly or winding roads.
- Very windy areas.
- When driving with limited view (possibly due to bad weather, such as fog, snow, rain or sandstorm) - Do not use smart cruise control when towing a trailer.
- To Adjust the Sensitivity of Smart Cruise Control
- To Convert to Cruise Control Mode
- Smart Cruise Control Speed
- Radar to Detect Distance to the Vehicle Ahead
- Limitations of the System
To turn Cruise Control off
Push the CRUISE button (the CRUISE indicator light will go off).
Turn the engine OFF.
...
To Adjust the Sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode (Driving Assist)
and select SCC (Smart Cruise Control). ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Power Window Switch Description and Operation
Description
System Diagram
Driver Door Module (DDM)
Driver Door Module (DDM) is part of CAN configuration,
communicating with BCM, SMK, SJB, PSM, and ADM via CAN while performing
wired signal I/Os with safety power windows.
Operate the buttons of DDM located on the inner side of the
...
Hyundai Sonata LF 2014-2019 Service Manual: Description and Operation
Description
EPS (Electric power steering) system uses an electric motor
to assist the steering force and it is an engine operation independent
steering system.
EPS control module controls the motor operation according to
information received from the each sensor and CAN (Controller Area
...
