Hyundai Sonata: Fuel Delivery System / Fuel Pump Control Module (FPCM) Specifications
| Specification |
| Items | Specification | |
| Applied Voltate (V) | 6~18 | |
| Current Consumption (A) | Max. 15 | |
| Fuel Pressure | Start | Max. 600 KPa (Max. 6.1 kgf/cm?, Max. 87.0 psi) |
| In operation | 350 ~ 500 KPa (3.5 ~ 5.1 kgf/cm?, 50.7 ~ 72.5 psi) | |
Fuel Pump Control Module (FPCM) Description and Operation
Description
The fuel pump control module (FPCM) is installed on the right
side of the fuel tank on the fuel pump top plate and controls the DC
motor mounted inside the low pressure fuel pump.
...
Fuel Pump Control Module (FPCM) Schematic Diagrams
Circuit Diagram
Fuel Pressure Control Module (FPCM) Terminal And Input/Output signal
FPCM Terminal Function
Pin No.DescriptionConnected to1Fuel sender ground Fuel Pump 2Fuel pressure sensor (FPS) ...
Other information:
Hyundai Sonata LF 2014-2019 Owners Manual: With Tire Mobility Kit (TMK, if equipped) - Type A
For safe operation, carefully read and follow the instructions in this manual
before use.
(1) Compressor
(2) Sealant bottle
The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected
by an authorized HYUNDAI dealer as soon as possible.
CAUTION
One sealant bottle for one ...
Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip.
Installation
1.
Install the crash pad side switch assembly after conne ...
