Hyundai Sonata LF: Dual Clutch Transmission Control System / Inhibitor Switch Components and Components Location

Input shaft speed sensor 2 Repair procedures

Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the battery and tray. (Refer to Engine Electrical System - "Battery") 3...

Inhibitor Switch Description and Operation

Description • Components location : DCT (Dual Clutch Transmission) • Function - The inhibitor switch mounted on the upper of transaxle and connected with shifter lever...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor (ATS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ATS connector. 3. Measure resistance between the ATS terminals 1 and 2 [B1/S1]. 4. Check that the resistance is within the specification. Specification: Refer to "Specification" Removal 1...

Hyundai Sonata LF 2014-2019 Service Manual: Crankshaft Position Sensor (CKPS) Description and Operation

Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates...