| Specification |
| Items | Specification | |
| Applied Voltate (V) | 6~18 | |
| Current Consumption (A) | Max. 15 | |
| Fuel Pressure | Start | Max. 600 KPa (Max. 6.1 kgf/cm?, Max. 87.0 psi) |
| In operation | 350 ~ 500 KPa (3.5 ~ 5.1 kgf/cm?, 50.7 ~ 72.5 psi) | |
Fuel Pump Control Module (FPCM) Description and OperationDescription The fuel pump control module (FPCM) is installed on the right side of the fuel tank on the fuel pump top plate and controls the DC motor mounted inside the low pressure fuel pump...
Schematic [EPB Type] [General Type] Terminal Funtion [EPB Type] PIN NODesciptionCurrentmaxmin1Voltage supply for pump motor39A 10A 2RR EPB motor power30A - 3RR EPB motor ground30A - 4- - - 5Local CAN High 30mA 20mA 6Electric parking brake signal 1 20mA - 7Electric parking brake signal 220mA - 8Electric parking brake signal 320mA - 9Electric parking brake signal 420mA - 10- - - 11- - - 12RL EPB motor ground30A - 13RL EPB motor power30A - 14Ground for solenoid valves and ECU30A 10A 15- - - 16ESS200mA 100mA 17FR Wheel speed sensor signal16...
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2. 4. Check that the resistance is within the specification...