Hyundai Sonata: Lighting System / High Mounted Stop Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear package tray trim.
(Refer to Body - "Rear Package Tray Trim")
3.
Remove the high mounted stop lamp after disengaging the mounting clip.

Installation
1.
Install the rear high mounted stop lamp.
2.
Install the package tray trim.
3.
Connect the negative (-) battery terminal.
License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid panel. (Refer to Body - "Trunk Lid Trim") 3. Remove the license lamp after disengaging the license lamp mo ...

Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts (4EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Special Service Tools
Special Service Tools Tool(Number and Name)IllustrationUse09200-3N000Engine support fixture(Beam)Removal and installation of the transaxle.Use this beam (SST No. : 09200-3N000) with the supporter (SST No. : 09200-2S000).?Permit operating with 09200-38001.?Refer to the engine support fixture ass ...

Hyundai Sonata LF 2014-2019 Service Manual: Roof Side Molding Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Ta ...

© 2018-2024 www.hsonatalf.org