Hyundai Sonata: Dual Clutch Transmission Control System / Gear Actuator Assembly Specifications

Specification
Item
Condition
Specification
Resistance (line to line)
Shift motor 1/2
135.4 m? ± 10 %
Select solenoid 1/2
0.7 m? ± 10 %
Max. current
Shift motor 1/2
45 A
Select solenoid 1/2
20 A
Select solenoid sensor output
Push
4.0 ± 0.15 V
Pull
1.0 ± 0.15 V
Operation condition (°C)°F
-40 ~ 257 °F (- 40 ~ 125 °C )
Rated voltage
13 V
Sensor supply voltage
8.75 V ± 10 %

Gear Actuator Assembly Components and Components Location
Components 1. Gear actuator assembly2. Shift motor (Even)3. Shift motor (Odd)4. Select solenoid (Odd)5. Select solenoid (Even) ...

Gear Actuator Assembly Description and Operation
Description • Components location : DCT (Dual Clutch Transmission) • Function The gear actuator comprises the shift motor and select solenoid. Gear actuator shift motor and select so ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Camshaft Position Sensor (CMPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal     • DON’T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine ...

Hyundai Sonata LF 2014-2019 Service Manual: Power Door Mirror Switch Repair procedures
Inspection [Power Window Module (IMS)] 1. Disconnect the negative (-) battery terminal. 2. Remove the front left door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the power mirror switch connector from the door trim. 4. Check for continuity between the terminals in each ...

© 2018-2025 www.hsonatalf.org