| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump") |
| 2. |
Disconnect the electric pump wiring connector (A), and the fuel sender connector (B).
|
| 3. |
Remove the reservoir-cup after releasing the fixing hook (A).
|
| 4. |
Remove the fixing clip (A), and then disconnect the fuel tube (B).
|
| 5. |
Disconnect the ground cable (A). |
| 6. |
Remove the head assembly (B) after removing the cushion pipe fixing clip (C).
|
| 7. |
Remove the pre-filter (B) after releasing the fixing hooks (A).
|
| 8. |
Remove the fuel pump motor (A) in the direction of an arrow.
|
| Installation |
| 1. |
Install in the reverse order of removal. |
Fuel Filter Repair proceduresReplacement 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Remove the fixing clip (A), and then disconnect the fuel tube (B)...
Fuel Sender Repair proceduresRemoval 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). 3. Remove the fuel sender (A) after releasing the fix hook...
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates...
S..