Hyundai Sonata: Engine And Transmission Assembly / Engine Mounting Components and Components Location

Components

1. Transaxle mounting bracket
2. Roll road bracket
3. Engine mounting bracket
4. Engine mounting support bracket

Engine Room Under Cover Repair procedures
Removal and Installation 1. Loosen the mounting clip and bolt and then remove the under cover (A). Tightening torque: 7.8 ~ 11.7N.m (0.8 ~1.2kgf.m, 5.7 ~ 8.6 lb-ft) 2. Install in the rev ...

Engine Mounting Repair procedures
Removal and Installation Rollroad Mounting 1. Rollroad bracket mounting bolts and rollroad bracket (A). Tightening torque Bolt (B) : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: DCT Control Module (TCM) Schematic Diagrams
1. TCM Connector and Terminal Function 2. TCM Terminal Function Connector [A] PinDescriptionPinDescription1Clutch Actuator (Clutch Motor 1 (ODD)_Phase V)17-2Clutch actuator (Clutch Motor 2 (EVEN) Phase V)18Clutch Actuator (Clutch Motor 1 (ODD)_HALL 1)3Select Actuator (Shift Solenoid 2 (EVEN)_Gr ...

Hyundai Sonata LF 2014-2019 Service Manual: Filler-Neck Assembly Repair procedures
Removal 1. Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2. Open the fuel filler door and then remove the filler-neck installation screw (A). 3. Lift the vehicle. 4. Remove the rear-LH wheel, tire, and the inner wheel house. 5. Remove the rear sub ...

© 2018-2021 www.hsonatalf.org