Hyundai Sonata LF: Engine And Transmission Assembly / Engine Mounting Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Mounting Repair procedures

Removal and Installation
Rollroad Mounting
1.
Rollroad bracket mounting bolts and rollroad bracket (A).
Tightening torque
Bolt (B) :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
Bolt (C) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

2.
Remove the rollroad supprt bracket (A).
Tightening torque:
49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)

3.
Install in the reverse order of removal.
Engine Mounting Support Bracket
1.
Remove the engine room under cover.
2.
Remove the reservoir tank.
(Refer to Cooling System - "Reservoir Tank")
3.
Install the jack to the edge of upper oil pan to support the engine.
   
Insert the rubber block between jack and oil pan.
4.
Remove the engine mounting support bracket (A).
Tightening torque
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

5.
Install in the reverse order of removal.
6.
Remove the engine mounting bracket (A).
Tightening torque
68.6 ~ 88.3 N.m (7.0 ~ 9.0 kgf.m, 50.6 ~ 65.1 lb-ft)

Transaxle Mounting Bracket
1.
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
2.
Remove the battery and tray.
(Refer to Engine Electrical System - "Battery")
3.
Remove the ECM.
(Refer to Fuel System - "Engine Control Module")
4.
Remove the engine room under cover.
(Refer to Engine Room Under Cover - "Engine Room Under Cover")
5.
Install the jack to the edge of transaxle.
6.
Remove the service cover (A).

7.
Remove the transaxle mounting bolts (A).
Tightening torque :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)

8.
Remove the transaxle mounting bracket (A).
Tightening torque :
68.6 ~ 88.3 N.m (7.0 ~ 9.0 kgf.m, 50.6 ~ 65.1 lb-ft)

9.
Install in the reverse order of removal.

    Engine Mounting Components and Components Location

    C..

    Engine And Transmission Assembly Repair procedures

    Removal 1. Remove the engine cover. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the air duct and air cleaner assembly...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Fuel Pressure Sensor (FPS) Schematic Diagrams


    Circuit Diagram Fail-Safe Mode Item Fail-Safe Output Voltage (V) 12     If the fuel pressure sensor malfunctions, it enters fail safe mode. This means that the fuel pressure rises to match the increasing value of the current level and the pressure in the low pressure fuel line remains static despite the rising fuel pressure...

    Hyundai Sonata LF 2014-2019 Service Manual: Knee Airbag (KAB) Module Description and Operation


    Description The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB.     Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using a specified tester...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org