| Components |

Curtain Airbag (CAB) Module Description and OperationDescription Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs...
Curtain Airbag (CAB) Module Repair proceduresRemoval 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to Body - "Roof Trim Assembly") 3...
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench [Hex 14] (A). Tightening torque : 4.0 ± 1.0 N.m (0.41 ± 0.1 kgf.m, 2.95 ± 0.72 lbf-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier...
Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. Disconnect the rear door latch connector (A). 3. Remove the rear door inside handle cage (A). 4. Remove the rear door inside handle cable (A) by pushing it rearward...