Hyundai Sonata: Heating, Ventilation and Air Conditioning / Blower
- Blower Unit Components and Components Location
- Blower Unit Repair procedures
- Blower Motor Repair procedures
- Power Mosfet Description and Operation
- Power Mosfet Repair procedures
- Climate Control Air Filter Description and Operation
- Climate Control Air Filter Repair procedures
- Intake Actuator Components and Components Location
- Intake Actuator Description and Operation
- Intake Actuator Repair procedures
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...
Blower Unit Components and Components Location
Component Location
1. Blower unit assembly
Components
1. Intake actuator2. Intake case [LH]3. Intake door assembly4. Air filter5. Filter cover assembly6. Intake inlet seal 7. Intake case [ ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Indicator Repair procedures
Removal
Blind Spot Detection Warnig Indicator
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirro (A).
Installation
Blind Spot Detection Warnig Indicator
1.
Install the outside mirror.
2.
Connect the negative (-) battery terminal.
Inspection
Diagnosis with GDS ...
Hyundai Sonata LF 2014-2019 Service Manual: Input shaft speed sensor 1 Description and Operation
Description
•
Components location : DCT (Dual Clutch Transmission)
•
Function
The input shaft speed sensor is important in that it detects
the input shaft RPM and sends this information to the Transmission
Control Module (TCM).
It provides important input information for electr ...
