Hyundai Sonata: Blower / Climate Control Air Filter Repair procedures

Replacement
1.
Remove the stopper (B) from the glove box (A).

2.
Disconnect the air damper (A) from the glove box (B).

3.
Remove the filter cover (A) by pressing the knob.

4.
Replace the air filter (A) with a new one according to the direction of air filter.

   
To remove the filter easily, press the right side inward then pull out the filter.
In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.
5.
Install in the reverse order of removal.
Climate Control Air Filter Description and Operation
Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventio ...

Intake Actuator Components and Components Location
Components Location 1. Intake actuator ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Specifications
Specification ItemSpecificationUltrasonic sensorVoltage ratingDC 12VDetecting range40 cm ~ 120 cmOperation voltageDC 9 ~ 16VOperation currentMAX 300mAOperation temperature-30°C ~ +80°C (-22°C ~ +176°C)Operation frequency48 ± 5KHzNumber of sensors4EA (Left side, Left center, Right center, R ...

Hyundai Sonata LF 2014-2019 Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the engineroom under cover. 3. Remove the passenger side front tire. 4. Remove the crankshaft damper pulley (A). Tightening torque : (47.0 ~ 50.9 N.m) + (38°~ 42°) [(4.8 ~ 5.2 ...

© 2018-2023 www.hsonatalf.org