Hyundai Sonata LF: DCT (Dual Clutch Transmission) System / Specifications
Transmission type
| D7UF1
|
Egnine type
| Gasoline 1.6 T-GDI
|
Transmission fluid
| Quantity
| 1.9 ~ 2.0 L
|
Specified lubricant
| API Service GL-4, SAE 70W
• Recommended oil
| - |
SHELL: SPIRAX S6 GHME 70W DCTF |
| - |
GS CALTEX: GS DCTF HD 70W |
|
Gear ratio
| 1st
| 3.929
|
2nd
| 2.318
|
3rd
| 2.043
|
4th
| 1.070
|
5th
| 0.822
|
6th
| 0.884
|
7th
| 0.721
|
Reverse
| 5.304
|
Final gear ratio
| 1st, 2nd, 4th, 5th
| 4.294
|
3rd, 6th, 7th, R
| 3.174
|
Input Shaft Speed Sensor 1,2
? Type: Hall effect sensor
? Specifications
Item
| Specifications
|
Current value (mA)
| Low
| 14.0
|
High
| 7.0
|
Gear Actuator Motor (EVEN,ODD)
? Specifications
Item
| Specifications
|
Operation condition (°C)°F
| (20 ± 5) 60 ± 41
|
Output resistance (m?)
| 135.4 ± 10%
|
Gear Actuator Solenoid (EVEN, ODD)
? Specifications
Item
| Specifications
|
Operation condition (°C)°F
| (20 ± 5) 60 ± 41
|
Output resistance (m?)
| 0.7 ± 0.07
|
? Type: Combination of output signals from 4 terminals
? Specifications
Item
| Specifications
|
Output type
| Combination of output signals
|
Power supply (V)
| 12
|
Item
| N.m
| kgf.m
| lb-ft
|
Engagement fork cover mounting bolt
| 3.9 ~ 5.9
| 0.4 ~ 0.6
| 2.9 ~ 4.3
|
TCM mounting bolt
| 9.8 ~ 11.8
| 1.0 ~ 1.2
| 7.2 ~ 8.7
|
Shift cable bracket mounting bolt
| 19.6 ~ 26.5
| 2.0 ~ 2.7
| 14.5 ~ 19.5
|
Input shaft speed sensor mounting bolt
| 9.8 ~ 11.8
| 1.0 ~ 1.2
| 7.2 ~ 8.7
|
Shift lever assembly mounting bolt
| 8.8 ~ 13.7
| 0.9 ~ 1.4
| 9.4 ~ 10.8
|
Inhibitor swtich mounting bolt
| 9.8 ~ 11.8
| 1.0 ~ 1.2
| 7.2 ~ 8.7
|
Manual Lever mounting nut
| 17.4 ~ 24.5
| 1.8 ~ 2.5
| 13.0 ~ 18.1
|
Oil drain plug
| 58.8 ~ 78.5
| 6.0 ~ 8.0
| 43.4 ~ 57.9
|
Oil filler plug
| 58.8 ~ 78.5
| 6.0 ~ 8.0
| 43.4 ~ 57.9
|
stator motor mounting bolt
| 42.2 ~ 53.9
| 4.3 ~ 5.5
| 31.1 ~ 39.8
|
Transmission upper mounting bolt (Transmission=>Engine)
| 42.2 ~ 53.9
| 4.3 ~ 5.5
| 31.1 ~ 39.8
|
Transmission lower mounting bolt (Engine=>Transmission)
| 42.2 ~ 53.9
| 4.3 ~ 5.5
| 31.1 ~ 39.8
|
Transmission support mounting bolt
| 58.8 ~ 78.5
| 6.0 ~ 8.0
| 43.4 ~ 57.9
|
roll stopper bracket mounting bolt
| 49.0 ~ 68.6
| 5.0 ~ 7.0
| 36.2 ~ 50.6
|
Clutch actuator mounting bolt
| 19.6 ~ 26.5
| 2.0 ~ 2.7
| 14.5 ~ 19.5
|
Fork cover mounting bolt
| 3.9 ~ 5.9
| 0.4 ~ 0.6
| 2.9 ~ 4.3
|
Gear actuator mounting bolt
| 19.6 ~ 26.5
9.8 ~ 11.8
| 2.0 ~ 2.7
1.0 ~ 1.2
| 14.5 ~ 19.5
7.2 ~ 8.7
|
Clutch engagement frok and bearing sleeve mounting bolt
| 9.8 ~ 11.8
| 1.0 ~ 1.2
| 7.2 ~ 8.7
|
Transmission bracket hanger mounting bolt
| 19.6 ~ 26.5
| 2.0 ~ 2.7
| 14.5 ~ 19.5
|
Item
| Specified lubricant
| Quantity
|
Input shaft 1/2 spline
| Extreme pressure grease for vehicle
| 0.15-0.25 g
|
Clutch Engagement Fork
| Extreme pressure grease for vehicle
| 0.1-0.2 g
|
Special Service Tools
Tool(Number and Name)IllustrationUse09200-3N000Engine support fixture(Beam)Removal and installation of the transaxle.Use this beam (SST No...
Other information:
Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Disconnect the battery (-)terminal (A) and then (+)terminal (B).
3.
Remove the TCM.
(Refer to Automatic Transaxle System - "Transaxle Control Module (TCM)")
4...
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [C500-A]
Pin No.DescriptionConnected to1Injector (Cylinder #3) [High] control outputInjector (Cylinder #3)2Injector (Cylinder #4) [High] control outputInjector (Cylinder #4)3Injector (Cylinder #2) [Low] control outputInjector (Cylinder #2)4Electric Waste Gate Actuator (EWGA) DC Motor output (+)Electric Waste Gate Actuator (EWGA) 5Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] heater control outputHeated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]6-?7-8-?9Sensor ground Electric Waste Gate Actuator (EWGA) 10-?11-?12-13-?14Cooling fan relay [High] control outputCooling fan relay [High]15CVVT Oil Control Valve (OCV) [Bank 1/Exhaust] control outputCVVT Oil Control Valve (OCV) [Bank 1/Exhaust]16Injector (Cylinder #2) [High] control outputInjector (Cylinder #2)17Injector (Cylinder #1) [High] control outputInjector (Cylinder #1)18Injector (Cylinder #3) [Low] control outputInjector (Cylinder #3)19Electric Waste Gate Actuator (EWGA) DC Motor output (-) Electric Waste Gate Actuator (EWGA) 20Heated Oxygen Sensor (HO2S) [Bank 1/Sensor2] heater control outputHeated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]21-?22-?23Engine Coolant Temperature Sensor (ECTS) signal inputEngine Coolant Temperature Sensor (ECTS)?24Sensor groundEngine Coolant Temperature Sensor (ECTS) 25-?26Fuel Tank Pressure Sensor (FTPS) signal inputFuel Tank Pressure Sensor (FTPS)27Fuel pump relay control output (NON-Smart key type)Fuel pump relayCanister Close Valve (CCV) control output (Smart key type)Canister Close Valve (CCV)28-?29-30-?31Ignition coil (Cylinder #3) control outputIgnition coil (Cylinder #3)32Ignition coil (Cylinder #1) control outputIgnition coil (Cylinder #1)33Injector (Cylinder #1) [Low] control outputInjector (Cylinder #1)34Fuel Pressure Control Valve (FPCV) [High] control outputFuel Pressure Control Valve (FPCV)35ETC motor [-] control outputETC motor36-?37Knock Sensor (KS) signal inputKnock Sensor (KS)38Sensor groundKnock Sensor (KS)39-40Brake Light switch signal inputBrake switch41-42-43-?44-?45CVVT Oil Control Valve (OCV) [Bank 1/Intake] control outputCVVT Oil Control Valve (OCV) [Bank 1/Intake]46Ignition coil (Cylinder #4) control outputIgnition coil (Cylinder #4)47Ignition coil (Cylinder #2) control outputIgnition coil (Cylinder #2)48Injector (Cylinder #4) [Low] control outputInjector (Cylinder #4)49Fuel Pressure Control Valve (FPCV) [Low] control outputFuel Pressure Control Valve (FPCV)50ETC motor [+] control outputETC motor51-?52Electric Waste Gate Actuator (EWGA) Feed beck signal Electric Waste Gate Actuator (EWGA) 53Brake Test switch signal inputBrake switch54-?55-56Electric load signal input [Defrost]Alternator57Alternator COM signal outputAlternator58Engine speed signal outputCluster59Cooling fan relay [Low] control outputCooling fan relay [Low] 60-
Connector [C500-K]
Pin No...
Special Service Tools