Hyundai Sonata: Blower / Power Mosfet Description and Operation

Description
It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor.
Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper oper ...

Power Mosfet Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Check the output voltage of fuel pressure sensor (FPS). Specification : Refer to “Specification” Removal 1. Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2. Remove the rear sea ...

Hyundai Sonata LF 2014-2019 Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the engineroom under cover. 3. Remove the passenger side front tire. 4. Remove the crankshaft damper pulley (A). Tightening torque : (47.0 ~ 50.9 N.m) + (38°~ 42°) [(4.8 ~ 5.2 ...

© 2018-2021 www.hsonatalf.org